Please help me modify the original file so that the hard drive is recognized as NVMe. I tried flashing a different file and it worked, but I lost my Windows license.
About this board
This thread is for the Dell Latitude 5400 does not recognize NVMe SSD.
Compare the board number printed on the PCB (near the RAM slots or under the battery) with the files before you flash.
Files usually needed for this board
- BIOS (full SPI chip dump, .bin)
- EC / KBC firmware, if the board uses a separate EC chip
- Schematic (PDF)
- Boardview (.brd / .bdv / .cad)
Usually needed when the laptop powers on with a black screen after a BIOS update, is stuck in a boot loop, or is locked with a BIOS password.
Before flashing, always read and save the original chip. It holds the serial number, UUID, MAC address and ME data for that exact machine.
Have a tested file for this board? Reply below and help the next technician. Looking for something else? Search all files in the File Finder.
Attachments
GD25Q256C@LA-G892P OLD.rar
11.3 MB · Views: 6
11.3 MB · Views: 6
