USE:
1: Flash and replace current BIOS with the generated patch file
2: Boot the machine
3: Press ENTER/F1/etc. to enter BIOS settings
4: Enter any character when asked for the supervisor password.
5: Press enter when it shows Hardware ID
6: Press space bar twice when asked
7: Turn off machine
8: Restore original BIOS
9: Reset BIOS settings to factory default
NOTE:
When booting the patched BIOS, you might have to:
Hold the anti-tamper switch down the whole time (use tape)
Remove the hard disk or replace it with a locked one
1: Flash and replace current BIOS with the generated patch file
2: Boot the machine
3: Press ENTER/F1/etc. to enter BIOS settings
4: Enter any character when asked for the supervisor password.
5: Press enter when it shows Hardware ID
6: Press space bar twice when asked
7: Turn off machine
8: Restore original BIOS
9: Reset BIOS settings to factory default
NOTE:
When booting the patched BIOS, you might have to:
Hold the anti-tamper switch down the whole time (use tape)
Remove the hard disk or replace it with a locked one
